Distilled Water Only

Remember to always use distilled water in your Cutera Laser system. Using tap or bottled drinking water can contaminate your system and damage the device over time. Even a capful of inappropriate water can contaminate the cooling system..

Please remember to have your Cutera Laser system serviced annually to check calibration and change filters.

Cleaning the air intake

The air intake is located on the bottom of the Cutera Laser system console and should be kept free of dust and lint accumulation. Inspect the air intake monthly. Lightly vacuum the air intake to remove any accumulated dust and lint to ensure that the unit air flow is not obstructed. Please refer to Cutera Operator Manual for detailed instructions.

Keeping Your Cutera Handpieces and Laser System out of Sub-freezing Temperatures

As we begin another season of Winter throughout the North Americas, please be aware of the risk of exposing Cutera products to sub-freezing temperatures. All of our products require internal water cooling, and any short term exposure to sub-freezing temperatures, could result in severe damage to any item associated to any Cutera Product. This includes any IPL, Titan, Pearl, and Pearl Fractional hand pieces, and Xeo or Solera System.
The Cutera Service Contract/Warranty Policy does not protect, nor warrant, any system or hand piece, from exposure to sub-freezing temperatures or any other type of owner negligence.
 
Please contact Cutera Technical Support at 1-866-258-8763 for questions about service.